[Equest-users] Help needed for modelling Water source Heat Pump system

[chitra n]

I am trying to model a Water source heat pump system for  the support areas
of a data center. Reading through DOE2 Volume 3, I realize that a better
option would be to model the system as a PSZ with a heat pump heat source
and water cooled condenser. Both options give me more than half of the time
as under cooled hours. There are two zones on a 24 hour schedule attached to
the water condensor unit. I have also noticed that when the condensor type
is changed to air-cooled, the system works fine. Any help/advice is greatly
appeciated.

Chitra.C.Nambiar
Environmental Building Strategies
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110303/50616d68/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Logicallis_110303.pd2
Type: application/octet-stream
Size: 1957 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110303/50616d68/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Logicallis_110303.inp
Type: application/octet-stream
Size: 147841 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110303/50616d68/attachment-0001.obj>