[Equest-users] Inputting Elevator and Cooking Loads on Sub-Meters

Grayson Jordan grayson at castrucciarchitect.com
Fri Mar 4 07:03:53 PST 2011


I'm sorry - I'm a bit of a novice.

I did try to assign both meters as sub-meters (by setting them up under
the submeter tab of the EM1).

 

I looked at BDL but couldn't make sense of it.

 

Any other guidance?

 

Grayson Jordan, RA

Associate Architect

 

Paul A. Castrucci, Architect

179 Rivington St., Suite 1A

New York, NY 10002 

voice: 212 254 7060 (ext 603)

fax:     212 260 7199

 

 

________________________________

From: James Hansen [mailto:JHANSEN at ghtltd.com] 
Sent: Friday, March 04, 2011 9:52 AM
To: Grayson Jordan
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Inputting Elevator and Cooking Loads on
Sub-Meters

 

Assign the sub-meter to EM1.  Otherwise it will give you an error.  Open
up the BDL file to troubleshoot errors like this.

-James


On Mar 4, 2011, at 9:24 AM, "Grayson Jordan"
<grayson at castrucciarchitect.com> wrote:

	Hi,

	 

	I am attempting to show elevator and cooking loads on sub-meters
so that I can demonstrate energy use for each of these loads discreetly.

	 

	I have attempted setting them up as direct loads, with
corresponding schedule to the Misc. Loads.

	 

	I have set them up as Sub-Meters and as Building Meters.

	 

	eQuest allows me to set up one sub or building meter no problem.
When I add the second, I get an error and eQuest won't run the
simulation.

	 

	Any idea on how to troubleshoot?

	 

	Grayson Jordan, RA

	Associate Architect

	 

	Paul A. Castrucci, Architect

	179 Rivington St., Suite 1A

	New York, NY 10002 

	voice: 212 254 7060 (ext 603)

	fax:     212 260 7199

	 

	 

	_______________________________________________
	Equest-users mailing list
	
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
	To unsubscribe from this mailing list send  a blank message to
<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110304/86b59497/attachment-0001.htm>


More information about the Equest-users mailing list