[Equest-users] Heating loop losses calculated as heat gains to the loop
Rob Rosen
rrosen at taitem.com
Tue Nov 1 08:34:42 PDT 2011
When losses are defined for a heating hot water loop (baseboard radiators)
in my model, the results are that the model uses more energy with a higher
loop loss, and less energy with a lower loop loss. It seems as if there is
a sign error (positive/negative) on the value entered for the loop loss
(when it is a heating loop).
The PS-D report shows a positive heat gain from "losses" to the heating
loop, as if it is a cooling loop.
Has anyone else had this problem, or has gotten the heating loop loss
parameter to give reasonable results?
Thanks,
Rob Rosen, LEED AP BD+C
Senior Energy Analyst
Taitem Engineering
110 S. Albany St.
Ithaca, NY 14850
Phone: 607-277-1118 ext 110
Fax: 607-277-2119
www.taitem.com <http://www.taitem.com/>
ü Please consider the environment before printing this e-mail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111101/1e3961d9/attachment.htm>
More information about the Equest-users
mailing list