[Equest-users] Separate Ice Storage Loop
Matthew W. Higgins
MWHiggins at bpce.com
Wed Oct 5 10:51:14 PDT 2011
Hello all, I'm working on a project that is evaluating the addition of Ice or CHW thermal storage to an existing 1500+ ton hospital. Because the Thermal Storage equipment will be "supplementary," I will need a separate charge loop, with the existing CHW loop as the discharge loop.
I am encountering a problem a result of needing to assign a terminal/fan-coil to every loop, whereas in reality the charge loop will not have a terminal/fan-coil on it. I tried creating a dummy zone/coil for the charge loop so the model would run, but the flow through this loop doesn't reach chiller inputs.
Any help would be appreciated!
Regards
Matthew Higgins, CEM, HBDP, (BD+C)
Energy Project Manager
Bridgers & Paxton Consulting Engineers, Inc.
4600-C Montgomery Blvd. NE
Albuquerque, NM 87109
505-883-4111
505-888-1436 Fax
mwhiggins at bpce.com
www.bpce.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111005/ba9f2162/attachment.htm>
More information about the Equest-users
mailing list