[Equest-users] Plenum Zone Creation

[Brad L. Huff]

I have found this subject discussed on the forums previously. However, eQuest does not seem to be cooperating with me. I am attempting to create one plenum zone per floor. I specified in the dd wizard one HVAC system per floor but it is still creating plenum zones for every space. This is going to be a 250,000 FT^2 building when I am finished with all the shells. I have found in the past that when I get buildings this large, eQuest begins running slow especially with multiple parametric runs. I found that one way to alleviate this problem is to have on plenum zone per floor.  Any help would be appreciated. Attached are the .inp and the .pd2 files.

Thank you

Brad Huff, E.I.T., LEED Green Associate, Mechanical Engineer I BVH Integrated Services I 860.286.9171 tel I 860.242.0236 fax I 50 Griffin Road South, Bloomfield CT 06002 I .bvhis.com<http://www.bvhis.com/> I twitter.com/bvhis I Hartford  Boston

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111018/07cf6596/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: A.inp
Type: application/octet-stream
Size: 87803 bytes
Desc: A.inp
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111018/07cf6596/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: A.pd2
Type: application/octet-stream
Size: 25862 bytes
Desc: A.pd2
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111018/07cf6596/attachment-0001.obj>