[Equest-users] Value not between 0.0000 and 100000.0000

Danny Xu danny_xu_chengyu at yahoo.com.au
Mon Oct 17 15:00:51 PDT 2011


Thanks Kelsey.
 
I fixed this problem by changing the setting "1 CAD unit = 2 feet" to "1 CAD unit = 0.03 inch".   I do not know why.
 
Regards,
Danny
 
 


________________________________
From: Kelsey VanTassel <KVanTassel at sustaineng.com>
To: Danny Xu <danny_xu_chengyu at yahoo.com.au>; "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
Sent: Monday, 17 October 2011 10:14 AM
Subject: RE: [Equest-users] Value not between 0.0000 and 100000.0000


Do you have daylighting turned on? I have gotten this error when I have daylighting turned on in wizard mode and then I make changes to the shells. I leave the daylighting off until I am done with the geometry.
 
Kelsey Van Tassel
Project Engineer | kvantassel at sustaineng.com
608.836.4488 ext. 20 | Fax: 608.836.4477
Sustainable Engineering Group
901 Deming Way, Suite 201
Madison, WI 53717
www.sustaineng.com
 
 
From:equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Danny Xu
Sent: Monday, October 17, 2011 8:48 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Value not between 0.0000 and 100000.0000
 
Hello,
 
Could anyone explain what is "value not between 0.0000 and 100000.0000" and how to correct it?  My project is a stadium and I used CAD drawing to input the building shell.  Thanks.
 
Regards,
Danny
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20111017/2b3781f8/attachment-0002.htm>


More information about the Equest-users mailing list