[Equest-users] Materials for baseline design

[Nick Caton]

All:

 

Also consider adding the .inp in the attached message to your toolbox
and simply importing to assign what you need.  This .inp is something
that's been distributed on the onebuilding.org lists in the past,
containing 90.1-2007 baseline roof and steel-framed wall constructions
for all climate zones, compiled with layers referencing Appendix A
requirements and materials per ASHRAE Fundamentals.  Review the notes
contained in the .inp for more info.

 

~Nick

 

 

 

NICK CATON, P.E.

SENIOR ENGINEER

 

Smith & Boucher Engineers

25501 west valley parkway, suite 200

olathe, ks 66061

direct 913.344.0036

fax 913.345.0617

www.smithboucher.com <x-msg://301/www.smithboucher.com>  

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Daniel
Knapp
Sent: Tuesday, September 20, 2011 8:31 AM
To: Jiao, Joey
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Materials for baseline design

 

The Rocky Mountain Institute has a lovely set of modelling tools for
eQuest, and they include a text file with ASHRAE baseline constructions
that can be copied and pasted into your .inp file.  Their file also
includes reset schedules for the CHW and HW loops and some other useful
tidbits.  

 

The link is:  http://www.rmi.org/rmi/ModelingTools

 

All the best,

Dan

 

-

Daniel Knapp, PhD, LEED(r) AP O+M

danielk at arborus.ca

 

Arborus Consulting

Energy Strategies for the Built Environment

www.arborus.ca

76 Chamberlain Avenue 

Ottawa, ON, K1S 1V9 

Phone: (613) 234-7178 ext. 113

Fax: (613) 234-0740

 

 

 

On 2011-09-20, at 12:29 AM, Jiao, Joey wrote:





Kelsey VanTassel KVanTassel at sustaineng.com
<mailto:equest-users%40lists.onebuilding.org?Subject=Re%3A%20%5BEquest-u
sers%5D%20Materials%20for%20baseline%20design&In-Reply-To=%3C82422C2EAD6
92049B1510B658F5C9E055432F18764%40SEGSERVER.seg.lan%3E> 
Tue Mar 1 06:49:26 PST 2011

*	Previous message: [Equest-users] Materials for baseline design
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/201
1-March/007970.html> 
*	Next message: [Equest-users] Materials for baseline design
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/201
1-March/007978.html> 
*	Messages sorted by: [ date ]
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/201
1-March/date.html#7972>  [ thread ]
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/201
1-March/thread.html#7972>  [ subject ]
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/201
1-March/subject.html#7972>  [ author ]
<http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/201
1-March/author.html#7972> 

________________________________

You can create custom constructions with the following layers. You will
need to adjust the thickness of the insulation layers slightly to
achieve the exact U-factor (inverse of overall R-value), but here is a
good starting point:
 
Roof (see A2.2.1): Built-up roofing, Polystyrene 4 in (R-5/in)
Walls (see A3.3.1): 1" Stucco, 2 in Polystyrene, create a material based
on resistance with a R-value of 6.0 to represent the effective R-value
of the steel studs plus batt insulation (Table A3.3), 5/8 in gypsum wall
board.
 
Kelsey Van Tassel
Mechanical Engineer | kvantassel at sustaineng.com
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
<mailto:kvantassel at sustaineng.com
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
>
608.836.4488 ext. 20 | Fax: 608.836.4477
 
Sustainable Engineering Group
901 Deming Way, Suite 201
Madison, WI 53717
www.sustaineng.com<http://www.sustaineng.com/>
 
 
From: equest-users-bounces at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
[mailto:equest-users-bounces at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
] On Behalf Of Loukiashenko Kseniya
Sent: Tuesday, March 01, 2011 4:08 AM
To: equest-users at lists.onebuilding.org
<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>

Subject: [Equest-users] Materials for baseline design
 
 
Hello all,
 
We are using eQuest for LEED and we are to create a baseline design of
our building. Characteristics for baseline construction materials
(walls,roof,floor, etc) must be equal to ASHRAE 90.1 (for our zone it is
table 5.5-6, p.24) data:
 
Roof - Insulation entirely above deck - U-0.048 / R-20.0 c.i.
Walls - Steel framed - U-0.064 / R-13.0+R-7.5c.i.
Slab-on-grade floors - unheated - F-0.540 / R-10 for 24 in.
 
Can anyone help to choose appropriate consructions/materials from eQuest
screen?
We are not sure what to choose as we are located in Europe and use
another parametrs and names.
 
Thank you!
 
 
Kseniya L.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <
http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/atta
chments/20110301/ca3e1d33/attachment.htm>

 

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to 
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110920/3b934404/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110920/3b934404/attachment-0002.jpeg>
-------------- next part --------------
An embedded message was scrubbed...
From: "Nick Caton" <ncaton at smithboucher.com>
Subject: Re: [Equest-users] Materials for baseline design
Date: Tue, 1 Mar 2011 13:28:55 -0500
Size: 25399
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20110920/3b934404/attachment-0002.eml>