[Equest-users] Parallel Boxes for Packaged RTU

[Charles Land]

When you first specify the system as a PIU it does have to have the cooling specified as chilled water, but once you create the system you can go under the cooling tab and change it to DX.  Then you can delete out your chilled water system.

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of R B
Sent: Wednesday, April 25, 2012 12:07 PM
To: Caleb Freeman
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Parallel Boxes for Packaged RTU


Use Powered induction for the system type, and in the cooling source under the cooling->coil capacity/control tab cool source as electric DX. If eQuest is not allowing that, maybe you don't have the latest version (actually this has been possible for quite some time).
-Rohini
On Wed, Apr 25, 2012 at 10:00 AM, Caleb Freeman <calebsfreeman at gmail.com<mailto:calebsfreeman at gmail.com>> wrote:
I am modeling an ASHRAE system type 6 and cannot seem to get equest to model this system type.  I have tried to user override the VAV to parallel but that does not work.  The default expression is set up to only allow parallel piu boxes for a piu system, but the only available piu system type is chilled water.  Any suggestions to override the VAV box type or the system type to DX from CHW would be helpful.

Thanks in advance,

Caleb

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120425/ab4cc321/attachment-0002.htm>