[Equest-users] VRV/VRF custom Curves

[Javed Iqbal]

Hi,

There was some discussion on this topic on 8th Nov. 2011, search with this
keyword in archives "*VRF/VRV modeling*". Also check following link to see
the way performance curve can be customized
http://www.energysoft.com/ep/VRF%20Application.pdf Hope this helps!
On Thu, Aug 23, 2012 at 12:31 PM, mayank bhatnagar
<mayank.23aug at gmail.com>wrote:

> Hello All,
>
> I am doing a project in which air cooled VRF system is installed. I made
> VRF system as per the presentation of VRV/VRF system found in archives.
> I have part load ratio data, provided by the manufacturer. Can I used this
> to make custom performance curves to get more accurate results? if yes,
> then, How can I make this, If there are some literature regarding it.
> Please share and give me some guideline.
>
> Any help would be appreciated.
>
>
> Regards,
>
> Mayank Bhatnagar
>
> Energy Analyst
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 


Javed Iqbal, LEED AP, CEA
Energy Analyst
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120823/8380083b/attachment-0002.htm>