[Equest-users] Chiller Sequencing and Chiller Curves

R B slv3sat at gmail.com
Fri Aug 31 07:25:02 PDT 2012


For the first question -
You can use equipment control to set the efficient chiller sequence as 1
and the other as 2, and prorate load as no.

-Rohini
On Fri, Aug 31, 2012 at 9:08 AM, Jeff Ross-Bain <jeff at rbgb.com> wrote:

> HI All,****
>
> ** **
>
> Two questions regarding chillers:****
>
> ** **
>
> **1.      **Is it possible to establish a schedule to where one main
> chiller (a new efficient one) operates all the time and a second chiller
> (old energy hog one) only comes on line to cover peak conditions?****
>
> **2.      **Is there a good tutorial out there for inputting custom
> chiller part load data and  or curves?****
>
> ** **
>
> Many thanks!****
>
> ** **
>
> *Jeff Ross-Bain, PE, *LEED AP BD+C, BEMP
> Principal****
>
> 404-220-8940 Office****
>
> 404-220-8955 Direct****
>
> *www.rbgb.com*
>
> Build Green. Save Time**
>
> ** **
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120831/897ed1f0/attachment-0002.htm>


More information about the Equest-users mailing list