[Equest-users] Require outside air fraction?

[Michael Campbell]

Hi,



I’m working on a project with parametric runs.  The model simulates fine
with no errors or warnings, but then in my parametric run I change my
PTAC’s to PSZ systems with an economizer and I receive the following error
messages:







Has anyone seen this before?  I ran the model the other day with the same
parametric run, the only thing I changed was that I specified a Supply
kW/cfm.



Any help is appreciated.



*Mike Campbell E.I.T., LEED AP O+M
Sustainability Specialist *

*Sustainable Solutions Corporation*

Office: 610-569-1047

www.SustainableSolutionsCorporation.com<http://www.sustainablesolutionscorporation.com/>

*Sustainable Solutions Corporation is WBENC and BCorp Certified.*



*This email message and any attachments are for the sole use of the
intended recipient(s) and may contain confidential and privileged
information. Any unauthorized review, use, disclosure or distribution is
prohibited. If you are not the intended recipient, please contact the
sender by reply email and destroy all copies of the original message and
any attachments.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20121207/34c6a0bb/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 109005 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20121207/34c6a0bb/attachment.png>