[Equest-users] Invalid Argument for parametric runs
Busman, Michael R
MBusman at chevron.com
Fri Dec 14 10:38:19 PST 2012
I've seen other reports of the same error message. One of the suggestions I've seen is to go to your Program Files folder, right click the eQUEST.exe file, select properties, then compatibility, and then select Windows XP with the highest numbered service pack available.
I get the message at times. It generally happens when I'm exiting wizard mode from making inputs. It appears that the inputs do get written to file, though. When I get the error message, at the top left of the screen I can see that my project is no longer displayed. I have to exit eQUEST and re-launch the program, and select the project I was working on. When I open the project, it generally seems that the input changes I made did get saved before the error message came up.
I'm not sure changing the compatibility mode will always fix the problem, however, it appears to be more of an irritant as your changes don't seem to get lost.
Michael R. Busman, CEM
Lead Project Engineer II
Chevron Energy Solutions
A Division of Chevron U.S.A., Inc.
145 S. State College Blvd.
Brea, CA 92821
eFax 866-420-0335 (Include my Full Name followed by "CAI:MHTZ" on Cover Sheet)
mbusman at chevron.com<mailto:mbusman at chevron.com>
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Michael Campbell
Sent: Friday, December 14, 2012 9:21 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Invalid Argument for parametric runs
I'm trying to create a parametric run to convert my PTAC system to a PSZ system and every time a get Invalid Argument message. The only thing that I am doing in the run is changing system type to PSZ and defining the Control Zone. Has anyone else had this issue or does anyone have any ideas on how to fix it?
Mike Campbell E.I.T., LEED AP O+M
Sustainable Solutions Corporation
Sustainable Solutions Corporation is WBENC and BCorp Certified.
This email message and any attachments are for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message and any attachments.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Equest-users