[Equest-users] Dummy Zone & DOAS with heat wheel recovery

[RIAD ABED]

Dear All e-Quest Users

Please how to model a Dummy Zone & DOAS with heat wheel device (dedicated outdoor outside air) in e-Quest….I need it please very urgent …if somebody please help me…..Your reply is very very highly appreciated …thanks by Advance
 
My Regards,
Riad el Abed
Chief MEP , PQP
Tel  +96170 643977
 
DEC Consultants
Po Box 26330
Abu Dhabi
Tel +9712 4457505
Fax +9712 4457506
www.dec.ae
_____________________________________________________________________ 
DISCLAIMER
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of DEC Consultants. Finally, although efforts were made to prevent virus transmission, the recipient should check this email and any attachments for the presence of viruses. DEC Consultants accepts no liability for any damage caused by any virus transmitted by this email. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120203/ff7c2222/attachment.htm>