[Equest-users] KW/Cfm Fan Power Limitation for Baseline & Proposed Model

[RIAD ABED]

Dear All e-Quest Users

Please If someone can help : 
 
1-KW/Cfm shall be calculated according to Fan Power Limitation method described in ASHRAE 90.1.2007 for the Baseline Method , but what about Proposed Model please ???
 
Should I used the same method for Proposed model to calculate the KW/Cfm but sure using the Cfm of Proposed Model ????
 
Thanks by Advance for all of u …….
 
My Regards,
Riad el Abed
Chief MEP , LEED GA,PQP
ASHRAE MEMBER
Tel  +96170 643977
www.riadabed.com
 
DEC Consultants
Po Box 26330
Abu Dhabi
Tel +9712 4457505
Fax +9712 4457506
www.dec.ae
_____________________________________________________________________ 
DISCLAIMER
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of DEC Consultants. Finally, although efforts were made to prevent virus transmission, the recipient should check this email and any attachments for the presence of viruses. DEC Consultants accepts no liability for any damage caused by any virus transmitted by this email. 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120220/f7921605/attachment.htm>