[Equest-users] Modeling incremental HVAC units

[Demba Ndiaye]

Erik,

This is the PTAC (Packaged Terminal Air Conditioner) type. In the "Heating" tab of the System Parameters, you will choose "Hot Water Loop" as the "Heat Source" (see enclosed illustration).

You will have to define a hot water loop in the "Water-Side HVAC" tab.

HTH,

Demba.

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Erik Rutherford
Sent: Thursday, February 09, 2012 12:20 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Modeling incremental HVAC units

I am new to eQuest, and I would like to model a building that primarily uses 'through-the-wall' incremental HVAC units for heating/cooling with DX coils for cooling and hot water coils for heating. I didn't see an explicit option for this configuration in the list of System Types. Any tips for modeling this system? Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120209/a2ecf836/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Capture.JPG
Type: image/jpeg
Size: 78112 bytes
Desc: Capture.JPG
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120209/a2ecf836/attachment-0002.jpeg>