[Equest-users] Different cooling loads with different system types

Walson, Kristy kristy.walson at tlc-eng.com
Mon Jan 16 10:20:49 PST 2012


Hi All,

I am working on a model where the baseline system type is Packaged Single Zone with a Fossil-Fuel Furnace (System Type 3) and the proposed system type is Chilled Water VAV with a Gas-Fired Steam Boiler.  When I take the proposed model, save as, and then just change the system type to the DX CV system, the cooling loads in the SS-D report change.  They are less when the DX CV system.  How can the loads change?  These should stay the same and the energy used to meet these loads should change.  Has anyone run into this before?

Kristy M. Walson, PE, LEED AP BD+C, BEMP
Associate / Sustainability Consultant

TLC Engineering for Architecture
Your 2030 Challenge Partner

255 South Orange Avenue, Suite 1600
Orlando, FL 32801-3463

phone:

407-841-9050

fax:

407-425-7367

direct:

407-487-1118

website:

www.tlc-engineers.com<http://www.tlc-engineers.com>


[cid:image001.gif at 01CCD451.A987CAB0]<http://www.tlc-engineers.com/>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120116/573c9857/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 5272 bytes
Desc: image001.gif
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120116/573c9857/attachment.gif>


More information about the Equest-users mailing list