[Equest-users] Scheduling ERV operation

[Justin Chin]

Thanks for replying Pasha.  I don't think I can use the Reset Temp schedule
because I want to control the ERV to turn on and off (1 & 0) for a certain
temperature, not discharge a certain supply temperature.

On Thu, Jul 26, 2012 at 12:54 PM, PKConsulting <pasha.pkconsulting at gmail.com
> wrote:

> I think you would choose the schedule of type RESET-TEMP which would allow
> you to apply outside air temperatures and supply temperatures according to
> your operation you described.
>
> Pasha
>
>
> On Jul 26, 2012, at 9:06 AM, Justin Chin <jchin.bu at gmail.com> wrote:
>
> > Does anyone know if there is a way to schedule an ERV to operate below
> 32F and above 80F and dead band in between.  Could I somehow hard code the
> ON/OFF/TEMP schedule to turn on when temperature >80 during summer periods
> and < 32 during winter?
> > _______________________________________________
> > Equest-users mailing list
> > http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> > To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120726/cb4b316c/attachment-0002.htm>