[Equest-users] LEED system 5

[Howe, Timothy]

Post the .pd2 and .inp file for this project and we may be able to help you better.

Timothy Howe, MS, LEED® AP BD+C
Mechanical Engineer
Stantec
61 Commercial Street
Rochester NY 14614
Ph:   (585) 413-5347
Fx:   (585) 272-1814
Cell: (585) 330-8681
stantec.com<http://www.stantec.com>

The content of this email is the confidential property of Stantec and should not be copied, modified, retransmitted, or used for any purpose except with Stantec's written authorization. If you are not the intended recipient, please delete all copies and notify us immediately.

ü Please consider the environment before printing this email.
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Matt Clough
Sent: Tuesday, June 05, 2012 10:24 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] LEED system 5

Salutations!

I just completed a LEED model, but after reviewing the data results, I think something is wrong.

The baseline building is showing no energy used for space heating, heat rejection, and service water heating.  I have the 2 boilers modeled, per G3.1.3.2.  This sort of makes sense because the model was showing high unmet heating hours, while the proposed building had had unmet cooling hours (successfully resolved).

I set up the system 5 equipment (Packaged VAV with reheat) in the wizard, but it doesn't seem to show a heating component in the DDE.  I'm going to keep looking, but wanted to see if someone could point me in the right direction.

Regards,
Matt Clough
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120605/2f3442f4/attachment-0002.htm>