[Equest-users] Cooling Tower

[Javed Iqbal]

possible reasons could be 1. Evaporation losses 2. Drift losses 3. Blow
down losses. check your cooling tower spec for the same. would be great to
know more from experienced equest users..

On Fri, Jun 8, 2012 at 10:37 AM, sambhav tiwari <tiwari.sambhav at gmail.com>wrote:

> Hi All,
>          In my sim file output under PVA report(Plant design
> parameter) for baseline i am getting gpm flow rate for condenser water
>  loop as 1620 gpm and for the cooling tower  water flow rate is 1540
> gpm .
>
> Now this condenser water loop is only circulating water to cooling
> tower then how the two flow rate are different they should be same
> value ,or is there any difference between
>
> Thanks
> Sambhav.
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>



-- 


Javed Iqbal, LEED AP, CEA
Energy Analyst
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120608/91d18776/attachment-0002.htm>