[Equest-users] The initial trial zone temperature

[CleanTech Analytics]

So with excessive infiltration rates the do you think the thermal mass
factors of the constructions would change the internal temps?


*Jeremiah D. Crossett*
*CleanTech Analytics*
*503-688-8951*
*www.cleantechanalytics.com* <http://www.cleantechanalytics.com>


*

This document may contain valuable information proprietary to CleanTech
Analytics which is private and confidential. It may not be shared, copied,
stored or transmitted in any form without the prior written consent of
CleanTech Analytics
*



On Sun, Jun 10, 2012 at 1:07 PM, R B <slv3sat at gmail.com> wrote:

> You could run the building with high infiltration rates and no
> cooling/heating coming on to get the inside temps same as outside. Once the
> temps are what you are looking for, you can schedule the infiltration back
> to normal levels.
> -Rohini
>
> On Sun, Jun 10, 2012 at 11:47 AM, Tsai <r99631007 at ntu.edu.tw> wrote:
>
>> Dear all,
>>
>> I'm using eQUEST to simulate a small container house without windows.
>> I want to get the hourly trial zone temperature, and the simulation time
>> is only for 1 or 2 days.
>>
>> I want to assum that in the beginning, the inside temperature is equal to
>> the outside temperature.
>> Therefore, I'd like to know if the initial inside trial zone temperature
>> is the same as the outside temperature (in the weather bin file).
>> If not, how could I set the initial inside zone trial temperature?
>>
>> I've done some simulation test, but the inside zone trial temperature
>> result for the first hour is always much lower than the outside temperature.
>>
>> By the way, I'm curious about the meaning of hourly temperature in
>> eQUEST. Are they the average temperature in each hour?
>>
>> Thank you.
>>
>> Lily
>>
>> ______________________________**_________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/**listinfo.cgi/equest-users-**
>> onebuilding.org<http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org>
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE@**ONEBUILDING.ORG<EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
>>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120610/9ad2ec07/attachment-0002.htm>