[Equest-users] how to set the electric car charging station and site lighting in eQUEST ?

[Sami, Vikram]

I would model both of these as direct loads on your electric meter.

Make sure you set your schedule correctly. I forget where, but there is also an option to set a photometer schedule for exterior lights.


Vikram Sami, LEED AP BD+C
Sustainable Design Analyst
1315 Peachtree St. NE, Atlanta, GA 30309
t: 404-443-7462    f: 404.892.5823       e: vikram.sami at perkinswill.com   www.perkinswill.com<http://www.perkinswill.com/>
Perkins+Will.  Ideas + buildings that honor the broader goals of society


From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of yangqingxia_866
Sent: Tuesday, June 19, 2012 9:15 PM
To: equest-users
Subject: [Equest-users] how to set the electric car charging station and site lighting in eQUEST ?

Hello Evergyone,

I am doing my first LEED project,and found a problem.

we have a couple of electric car charging station on the site in the parking lot, The electric car charging stations are on the library buildings electric meter. How do you handle this energy consumption cost in the energy modeling ?  Also, there is site lighting involved.Should I set these in the miss. load ? but it is according to the allocation.

Looking forward to your reply!

thanks!




2012-06-20
________________________________
yangqingxia_866
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120620/cc4ed1b2/attachment-0002.htm>