[Equest-users] eQuest - Campus Steam
Brad L. Huff
BradH at BVHis.com
Wed Mar 14 13:44:29 PDT 2012
Under the Water-Side HVAC Tab, right-click the Project: ‘xxx’ at the top of your component tree, choose “Steam Meter” and apply it to your Hot Water Loop. Then delete your boilers.
Brad Huff, EIT, LEED Green Associate, Mechanical Engineer I BVH Integrated Services, Inc.
50 Griffin Road South, Bloomfield, CT 06002 I 860.286.9171
One Gateway Center, Suite 701, Newton, MA 02458 I 617.658.9008
bvhis.com<http://www.bvhis.com/> I twitter.com/bvhis <www.twitter.com/bvhis >
From: Jim Paulino [mailto:jim.paulino at hesm.com]
Sent: Wednesday, March 14, 2012 10:25 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] eQuest - Campus Steam
I've inherited an energy model that was done over 3 years ago by someone no longer at our firm.
I'm an eQuest novice and have a question about a system that uses campus steam for heating.
The original model was set up with two gas fired boilers. (I see this in the Component Tree tab in the Water-Side HVAC section)
How do I tell eQuest that the heating is from a campus/purchased steam system so that it complies with ASHRAE 90.1-2004 item G220.127.116.11, Purchased Heat which requires the campus utility rate to be used?
Jim Paulino, P.E., CxA, LEED ™ AP
jim.paulino at hesm.com<login.jsp?at=03b13dbf-ff4b-44ba-9104-ab440ae6f131&mailto=jim.paulino at hesm.com>
"Engineering the Built Environment"
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Equest-users