[Equest-users] equest & crossover mac

Patrick J. O'Leary, Jr. poleary1969 at gmail.com
Sun Mar 18 12:58:14 PDT 2012


just for kicks i tried downloading the current crossover mac application 
& running equest 3.63b on it.  the results were:

1.  it installed,
2.  it crashed during the first attempt to simulate a building i've 
already completed
3.  except for the 3d view of the geometry it seemed to work fine after 
loading it again.  i was able to run the simulation previously run under 
win2k/3.63b & get the same results after starting with just .inp file 
(and had to figure out where crossover hid the equest weather directory).
4.  started a new project just to test it & it ran a simulation but also 
had problems showing the 3d view of the geometry.  that is to say, the 
3d view of the building does not work.  sorta defeats the purpose of 
running it under what is basically emulation if one can't visually check 
the building geometry to see if it represents what one thinks the input 
should look like.
5.  did not try tracing out zones over a .dwg background file.

some screen caps attached in zip file.


-------------- next part --------------
A non-text attachment was scrubbed...
Name: equest caps.zip
Type: application/zip
Size: 1069973 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120318/5cdc7d06/attachment-0002.zip>


More information about the Equest-users mailing list