[Equest-users] Equest-users Digest, Vol 48, Issue 20

[Patrick J. O'Leary, Jr.]

probably because just changing the floor-to-floor height in the .inp 
file for detailed mode does NOT change the wall heights 
(floor-to-ceiling & ceiling-to-roof or floor above).

On 3/20/12 2:13 PM, Danny Xu wrote:
> Hi all,
> In one of my projects, I changed the flr to flr height in the INP file 
> (the height is not allowed to be changed in detail model).   After run 
> the changed INP file, I can see the height changed in detail model, 
> but the simulation results does not change, no mater how great change 
> it is.  Does anyone have the same experience and know the reason?
> Thanks.
> Danny
> *From:* "equest-users-request at lists.onebuilding.org" 
> <equest-users-request at lists.onebuilding.org>
> *To:* equest-users at lists.onebuilding.org
> *Sent:* Tuesday, 20 March 2012 4:32 PM
> *Subject:* Equest-users Digest, Vol 48, Issue 20
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120320/1496eb6e/attachment-0002.htm>