[Equest-users] Adding/modifying zones in detailed mode

[bfountain at greensim.com]

My favorite way is to go back to my archived wizard file, make the changes then File Import the plant and system components (& possibly constructions) which I extract from my current detailed interface model .inp 

If the changes are minor, you can edit polygons in the detailed interface -- the trick is that your walls are associated with vertex number from the polygon. So, as you add verticies to the polygon you will the have to adjust the vertex number in the walls. (This is why it looks like the model "blows up" when you add a vertex).

It isn't easy either way but both are doable if you are careful.  Good luck.
Brian Fountain
bfountain at greensim.com

-----Original Message-----
From: Michael Campbell <mike at sustainablesolutionscorporation.com>
Sender: equest-users-bounces at lists.onebuilding.org
Date: Fri, 2 Nov 2012 11:36:18 
To: <equest-users at lists.onebuilding.org>
Subject: [Equest-users] Adding/modifying zones in detailed mode

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG