[Equest-users] eQuest Message - Occupancy type selection

David Griffin dgriffin at etcgrp.com
Mon Nov 19 07:31:17 PST 2012


I could be wrong on this one because I haven't seen this error in awhile, but try specifying a SPACE.
SPACE
Provides information associated with a space. U-name must be used to identify the space so that it can be referenced in SYSTEMS input. LIKE may be used to copy data from a previously U-named SPACE instruction. LIKE only copies the SPACE instruction and does not carry with it walls, roof, or floors.
Example input:
An 8-ft high space with a floor area of 800 ft2 is located 15 ft east along the south wall of a building aligned in a N-S direction. The overhead lighting is fluorescent (2W/ft2) with some task lighting (300W). There is a 1-hp motor (1 hp = 0.745 kW) in the space running at 80 percent efficiency (thus 20 percent of its energy consumption shows up as heat added to the space). Infiltration is 2 air changes per hour, and six people occupy the space. The space is conditioned.
It is the 'Activity Desc.' For the space in spreadsheet view.

Thanks,

David Griffin
Energy Analyst
ETC Group, LLC
801.278.1927 ext. 128
Cell 480.235.0899
Fax 801.486.0668
dgriffin at etcgrp.com<mailto:dgriffin at etcgrp.com>

[Copy of ETC_LogoOnly2_rgb_sm.png]
1997 South 1100 East, Suite 201, Salt Lake City, UT 84106-4471 - www.etcgrp.com<http://www.etcgrp.com/>
-------------------------------------------------------------------------------------------------------------------
CONFIDENTIALITY NOTICE This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged.  If you are not the intended recipient or the person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is strictly prohibited.  If you have received this transmission in error, please immediately notify us by telephone at (801) 278-1927 and destroy the original transmission and its attachments without reading them. Thank you.

From: Nimesh Prajapati Nimesh [mailto:nimonomics at yahoo.in]
Sent: Saturday, November 17, 2012 3:20 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] eQuest Message - Occupancy type selection


Dear eQuest Users,

When I try to run simulation with eQuest I am getting message as per attachment.

Can you please tell me - What does it mean? Where can I look for correcting it?

Thanks,

Nimesh Prajapati

HVAC Design Engineer
(+91 9687133492)
email: nimonomics at yahoo.in<mailto:nimonomics at yahoo.in>
Skype: nimonicideas
Please consider the environment before printing this e-mail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20121119/e7fb7f46/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1559 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20121119/e7fb7f46/attachment-0002.jpg>


More information about the Equest-users mailing list