[Equest-users] Fw: Mitsubishi Curves for eQuest

Rakesh Desai rakeshdesai at ecpl.co.in
Wed Nov 28 19:36:03 PST 2012


Dear Team,

 

I am modeling Diakin VRF system. Does anyone have similar details?

 

With best regards,

 

Rakesh Desai

 

From: Steven Savich [mailto:ssavich at systemswestengineers.com] 
Sent: Wednesday, November 28, 2012 3:25 AM
To: 'Paul Diglio'
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Fw: Mitsubishi Curves for eQuest

 

Paul,

 

Thanks for posting this to the list.  I can only hope more manufacturers
will follow suit with guidance documents for modeling their products.

 

Steven

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Paul Diglio
Sent: Tuesday, November 27, 2012 12:09 PM
To: Gastón Michaud F.; Rodrigo Cerqueira; equest-users at lists.onebuilding.org
Subject: [Equest-users] Fw: Mitsubishi Curves for eQuest

 

Gaston & Rodrigo:

Some good information from Mitsubishi attached.

 

Paul Diglio, CEM, CBCP

87 Fairmont Avenue
New Haven, CT 06513
203-415-0082

 

www.pdigliollc.com

 

 

----- Forwarded Message ----<jcefaly at hvac.mea.com>
To: paul at 4elementsgroup.com
Sent: Tue, November 27, 2012 11:33:34 AM
Subject: RE: Mitsubishi Curves

Paul,

 

I just noticed our earlier dialogue and realized that you are doing energy
modeling in eQUEST.  Mitsubishi recently put together the attached
application note for guidance in modeling VRF in this software (also
attached is a .inp file and a .pd2 file with the heating/cooling partload
curves already entered).

 

 

Joe Cefaly | Mechanical Engineer - LEED AP
MITSUBISHI ELECTRIC COOLING & HEATING
Direct: 508.281.4122 | Fax: 508.449.3811 | Cell: 508.330.0694

From: paul at 4elementsgroup.com [mailto:paul at 4elementsgroup.com] 
Sent: Monday, November 26, 2012 8:16 PM
To: Cefaly, Joseph
Subject: RE: Mitsubishi Curves

 

Joe:

 

I wonder if you can help me out.  I am looking for the performance data for
a PUHY-P1500-YSHM-A.  I want to write the custom curves for this unit.  I
guess it is not sold in the USA?  This is a project in another country.

 

Thank you,

 

Paul Diglio CEM, CBCP

 

4 Elements Group

89 Taylor Avenue

Norwalk, CT 06854

Cell 203-415-0082

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20121129/7b45208f/attachment-0002.htm>


More information about the Equest-users mailing list