[Equest-users] No Plenum zones

Michael Campbell mike at sustainablesolutionscorporation.com
Tue Oct 2 09:52:01 PDT 2012


Is there a minimum difference required to have plenums defined?  I have 1
foot difference but no plenums appear.



*Mike Campbell E.I.T., LEED AP O+M
Sustainability Specialist *

*Sustainable Solutions Corporation*

Office: 610-569-1047

www.SustainableSolutionsCorporation.com<http://www.sustainablesolutionscorporation.com/>

*Sustainable Solutions Corporation is WBENC and BCorp Certified.*



*This email message and any attachments are for the sole use of the
intended recipient(s) and may contain confidential and privileged
information. Any unauthorized review, use, disclosure or distribution is
prohibited. If you are not the intended recipient, please contact the
sender by reply email and destroy all copies of the original message and
any attachments.*



*From:* John Aulbach [mailto:jra_sac at yahoo.com]
*Sent:* Tuesday, October 02, 2012 12:41 PM
*To:* Michael Campbell; equest-users at lists.onebuilding.org
*Subject:* Re: [Equest-users] No Plenum zones



Michael:



On the Screen 2 Building Footprint, there is a "Floor Heights" area, broken
up into "Flr to Flr" and "Flr to clg". The difference in your inputs will
define the Plenum.



John R. Aulbach, PE, CEM

Senior Energy Engineer
------------------------------

*Partner** **Energy*

2154 Torrance Blvd, Ste. 100, Torrance, CA 90501
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745

www.ptrenergy.com | jaulbach at ptrenergy.com






------------------------------

*From:* Michael Campbell <mike at sustainablesolutionscorporation.com>
*To:* equest-users at lists.onebuilding.org
*Sent:* Tuesday, October 2, 2012 9:19 AM
*Subject:* [Equest-users] No Plenum zones



Hello,



I’m working on creating my zones in a model and when I move to detailed
mode, I don’t see any plenum zones.  I have my HVAC system as split system
heat pump with one system per zone.  How do I get the wizard to create
plenum zones?



Thanks,



*Mike Campbell E.I.T., LEED AP O+M
Sustainability Specialist *

*Sustainable Solutions Corporation*

Office: 610-569-1047

www.SustainableSolutionsCorporation.com<http://www.sustainablesolutionscorporation.com/>

*Sustainable Solutions Corporation is WBENC and BCorp Certified.*



*This email message and any attachments are for the sole use of the
intended recipient(s) and may contain confidential and privileged
information. Any unauthorized review, use, disclosure or distribution is
prohibited. If you are not the intended recipient, please contact the
sender by reply email and destroy all copies of the original message and
any attachments.*




_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20121002/1372ec18/attachment-0002.htm>


More information about the Equest-users mailing list