[Equest-users] HVAC for baseline model

Jeff Ross-Bain jeff at rbgb.com
Tue Oct 16 14:11:12 PDT 2012


Eva,

I may be off target, but it sounds like you may want to go to "Detailed Data
Edit" where those inputs are allowed. Make sure, though, that you complete
as many inputs as you can under "Wizard Data Edit" before you switch AND
save a copy of the Wizard version. There is no going back. Here is a screen
shot of where these buttons are located:

 



 

Good luck!

 

Jeff Ross-Bain, PE, LEED AP BD+C, BEMP
Principal

404-220-8940 Office

404-220-8955 Direct

 <http://www.rbgb.com/> www.rbgb.com

Build Green. Save Time

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Evangelia
Gklezakou
Sent: Tuesday, October 16, 2012 4:59 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] HVAC for baseline model

 

Dear Sirs,

I am a new user of eQUEST and I am responsible to create the baseline for a
project. The HVAC system which I have to install is the system 6 Packaged
VAV with PFP Boxes is the Pkgd Var Vol the correct choice in eQUEST? Under
the Cooling tab the Cooling Capacity-Cooling Source choice is deactivated
and so I cant select the electric DX, what can I do for this?

Thank you in advance.

 

Regards,

Eva

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20121016/a5915c29/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 32902 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20121016/a5915c29/attachment-0002.jpeg>


More information about the Equest-users mailing list