[Equest-users] Chiller Sequencing and Chiller Curves

Jeremy McClanathan jmcclanathan at CDiengineers.com
Tue Sep 4 11:22:14 PDT 2012


There is a custom chiller curve document written by Steve Gates that I found to be much easier to follow than the EDR guide.  You can download the document and an example spreadsheet from the following site:

http://www.esimforums.com/equest/viewtopic.php?f=13&t=116&start=0&view=viewpoll

Jeremy

___________________________________________
Jeremy McClanathan, P.E., BEMP, HFDP, LEED(r) AP BD+C
[cid:image001.jpg at 01CD8A8F.88DDB500]
19203 36th Avenue W, Suite 200, Lynnwood, WA 98036
P 425-672-1071 | F 425-778-8769
P Please consider the environment before printing this email.

From: Peter Baumstark [mailto:pbaumstark at sbcglobal.net]
Sent: Friday, August 31, 2012 9:11 PM
To: Jeff Ross-Bain
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Chiller Sequencing and Chiller Curves

The only tutorial I've seen that includes custom chiller curves is this one:

http://www.energydesignresources.com/resources/publications/design-guidelines/design-guidelines-hvac-simulation-guidelines.aspx

Pete

________________________________
From: R B <slv3sat at gmail.com<mailto:slv3sat at gmail.com>>
To: Jeff Ross-Bain <jeff at rbgb.com<mailto:jeff at rbgb.com>>
Cc: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Sent: Fri, August 31, 2012 7:25:07 AM
Subject: Re: [Equest-users] Chiller Sequencing and Chiller Curves
For the first question -
You can use equipment control to set the efficient chiller sequence as 1 and the other as 2, and prorate load as no.

-Rohini
On Fri, Aug 31, 2012 at 9:08 AM, Jeff Ross-Bain <jeff at rbgb.com<mailto:jeff at rbgb.com>> wrote:
HI All,

Two questions regarding chillers:


1.      Is it possible to establish a schedule to where one main chiller (a new efficient one) operates all the time and a second chiller (old energy hog one) only comes on line to cover peak conditions?

2.      Is there a good tutorial out there for inputting custom chiller part load data and  or curves?

Many thanks!

Jeff Ross-Bain, PE, LEED AP BD+C, BEMP
Principal
404-220-8940 Office
404-220-8955 Direct
www.rbgb.com<http://www.rbgb.com/>

Build Green. Save Time


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>




This email message, including any attachments, is for the sole use of the intended recipient and may contain confidential, proprietary, and/or privileged information, as well as content subject to copyright and other intellectual laws.  If you are not the intended recipient, you may not disclose, use, copy, or distribute the email message or its attachments.  If you believe you have received this email message in error, please contact the sender by reply email, immediately delete this email and destroy copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120904/7f4f883f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1232 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120904/7f4f883f/attachment.jpg>


More information about the Equest-users mailing list