[Equest-users] Verifying parametric run azimuths
Miller, Jessica
JMiller at trojb.com
Tue Sep 11 08:07:24 PDT 2012
Good morning,
I created parametric runs to run the building rotations. Because I need
to set the baseline azimuth to -21, I created two global parameters:
1. ROTATION DEG (set to 90, 180, and 270)
2. AZIMUTH DEFAULT (set to -21)
Then I defined AZIMUTH to be parameter("ROTATION
DEG")+parameter("AZIMUTH DEFAULT").
I would like to verify that the runs have the correct azimuths. Is
there a way to confirm this in the results or the .inp file?
Thank you,
Jessica K. Miller, EIT, LEED(r) AP
Associate
HVAC Engineering
TRO Jung|Brannen
22 Boston Wharf Road
Boston, Massachusetts 02210
t 617.502.3400
f 617.502.3401
www.trojungbrannen.com <blocked::http://www.trojungbrannen.com/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20120911/1f88db0d/attachment.htm>
More information about the Equest-users
mailing list