[Equest-users] installing domestic hot water tank, in detailed mode

[Nick Caton]

Hi Joseph,


*         Navigate to water-side tab

*         Right click the "project" line at the top of the component tree

*         "Create DW Heater..."

*         Select a name, "create from scratch", choose heating source

*         Assign a DHW loop (or create one if you haven't already:  "- library -", "DEFAULT-DHW" - you'll be prompted for loop flows & scheduling)

If you have DHW equipment already defined, you can alternatively copy (or link to) the existing heater equipment to save time.

In detailed edits, you can follow a similar procedure to create any component, under the appropriate tab.

~Nick
[cid:489575314 at 22072009-0ABB]

NICK CATON, P.E.
SENIOR ENGINEER

Smith & Boucher Engineers
25501 west valley parkway, suite 200
olathe, ks 66061
direct 913.344.0036
fax 913.345.0617
www.smithboucher.com

From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Joseph Braun
Sent: Tuesday, April 23, 2013 11:54 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] installing domestic hot water tank, in detailed mode

Hi all,

I am wondering if there is a way to input/install a domestic hot water tank after exiting the wizard mode within Equest.
If any of you have any information on this it would be greatly appreciated!

Joseph
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130423/d7f19aba/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1459 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130423/d7f19aba/attachment-0002.jpg>