[Equest-users] HELP PLEASE 2

John Aulbach jra_sac at yahoo.com
Sat Aug 3 21:24:53 PDT 2013

Hi Santiago:
You are catching the US group on their weekend. But i will see if iI can help.
As far as I know, either in Wizard EEM or Detail Edit EEM, eQuest does NOT LIKE any SYSTEM-TYPE change or any EQUIPMENT-TYPE change. Therefore, you cannot change a 4-pipe fan coil to a water source heat pump, nor an electric chiller to a gas chiller within the same run.
THAT BEING SAID, here is what you can do..
Copy your run and rename it (say EEM-1 NEW SYSTEM). Then, when you want to run this as an EEM run, when you are in the parametric screen (DETAIL EDIT), you need to check off the "Run based on separate building description", and call up your new modified model. THEN, when you run the parametric run, you will get the new run invoked as a EEM compared to the previous run.
Give this a try and good luck.
John Aulbach, PE Los Angeles CA

From: Santiago Ferreyra <santiag987 at hotmail.com>
To: "equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org> 
Sent: Saturday, August 3, 2013 12:52 PM
Subject: [Equest-users] HELP PLEASE 2

Hello, i got another problem with the  eQUEST energy efficiency measures, my model is a hospital and I'm trying to change the all HVAC systems, so I choose WHOLE SITE BUILDING option, and create another hvac system 

when i try to change the  zone group to the new hvac system (screen 14) an error occurs  and displays a warning screen that says the program stopped working correctly  and equest close

which may be the problem?

thanks for the help


Equest-users mailing list
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130803/bb88c55c/attachment-0001.htm>

More information about the Equest-users mailing list