[Equest-users] Basic Report Output (i.e. Excel output) Questions

[Jay M]

Hi all,

Thank you thus far for helping me learn eQuest, I have some very basic questions which are 30 second answer type questions much is appreciated thank you!!!


---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Question 1:  For hourly loads when I choose:

a)Does the following give me the total electricity consumption by the AC for cooling in kWh?  how would i get the associated power consumption by the fan/system? or does this includes it as well?
electric meter --->  cooling end-use energy   

b) same as a but for  Electric Furnace....  This I assume is the electric consumption for heating... how would i get the power consumption used by fans etc for the electric furnace? or does this includes it as well?
electric meter --> heating end-use energy

c) Does the following give me total Gas consumption by the furnace only?  how would i get the fan power consumption associated with the furnace?
electric meter ---> heating  end-use energy

d)   For the Natural Gas Furnace, does the Btu/hr = input or output?  ( I assume input since it is consumption)




---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Question 2: are the hourly readings   for the output  i.e.  hour 1,2....20....24     beginning of the hour or After the hour... becuase scheduling works :  1-2. 2-3.... etc  but the output in excel is hourly...


---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Question 3:
in SD wizard I can easily enter SEER  or   AFUE   for the systems... I can't find that anywhere in DDedit... I dont want to go back to SD becuase all my changes will be erased!




Thank you very much !!!  I may have a few beginner questions as I run into them But much is appreciated!

regards,
Jay






 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130207/7dd1b9d6/attachment.htm>