[Equest-users] use for residential

[RobertWichert]

Nice house.


Robert Wichert P.Eng. LEED AP BD&C
+1 916 966 9060
FAX +1 916 966 9068







===============================================

On 6/10/2013 11:05 AM, Mike Hupel wrote:
>
> That is a coincident.  I used it to model a house with 23 fan coils 
> and a 40 ton air cooled chiller.  Oh yes, I did say house.
>
> **
>
> *Michael Hupel*, B.Tech, CEM, LEED®AP
>
> Senior Mechanical Designer
>
> */Aegis Engineering Inc./*
>
> *56 Pennsylvania Ave. Suite 18*
>
> *Concord, ON L4K 3V9*
>
> *(905) 761-1264 ext. 24*
>
> *(905) 761-6949 fax*
>
> *(647) 702-3316 cell*
>
> PPlease don't print this e-mail unless you really need to.
>
> *//*
>
> This message may contain information that is confidential and/or 
> protected by law.  If the reader of this message is not the intended 
> recipient, you are hereby notified that any dissemination, 
> distribution, copying or communication of this message is strictly 
> prohibited.  If you have received this communication in error, please 
> contact the sender immediately and delete the message.  Please note 
> that although we will take all commercially reasonable efforts to 
> prevent viruses from being transmitted from our systems, it is the 
> responsibility of the recipient to check for and prevent adverse 
> action by viruses on its own systems.
>
> *From:*equest-users-bounces at lists.onebuilding.org 
> [mailto:equest-users-bounces at lists.onebuilding.org] *On Behalf Of 
> *John Aulbach
> *Sent:* June-10-13 2:04 PM
> *To:* Wolfe, Brian; equest-users at lists.onebuilding.org
> *Subject:* Re: [Equest-users] use for residential
>
> Hi Brain:
>
> I have personally created a house with eQuest and performed about 20 
> EEMs on it (various window, wall types, roof R values, unit 
> efficiency). My key is to only model it as one zone, unless you have a 
> ritzy house that has 2 AC zones.
>
> Do you bills to match so you are getting a good fit?
>
> John R. Aulbach, PE
>
> *From:*"Wolfe, Brian" <bwolfe at hksinc.com <mailto:bwolfe at hksinc.com>>
> *To:* "equest-users at lists.onebuilding.org 
> <mailto:equest-users at lists.onebuilding.org>" 
> <equest-users at lists.onebuilding.org 
> <mailto:equest-users at lists.onebuilding.org>>
> *Sent:* Monday, June 10, 2013 10:51 AM
> *Subject:* [Equest-users] use for residential
>
> Is eQUEST an acceptable program for analyzing single family 
> residential?  I'm assuming you can show it as multifamily, low-rise 
> exterior entrance. Thank you in advance.
>
> *--- Brian W. *
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to 
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG 
> <mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130610/7c14a999/attachment-0002.htm>