[Equest-users] How do I set Fan schedule To only meet loads?
Jay M
fd111441 at hotmail.com
Tue Mar 5 13:08:20 PST 2013
Hi all,
How do i set the fan schedule to only be on when cooling or heating demands are required?
In DD edit, fan schedule... I can only put "0" or "1"... if i put "0" then the system is off and never Cools or Heats when heating or cooling is needed.
When I put "1" the fan is always on even when no heating or cooling is needed.
As a result for some hours I would get the fan running when the AC/Heater is off.
I am currently forced to put "1" for all hours for fan schedule...
this ensures my AC/Heater will heat/cool the room when it is needed. But during idle hours... the Fan is using power to run according to "fan power consumption" output...
What value should i put in the fan schedule besides "0" or "1" to fix this problem?
Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130305/b4cdaf8c/attachment.htm>
More information about the Equest-users
mailing list