[Equest-users] Receptacle loads

[Andersen, Stephanie]

Hey all,

I've created my proposed model, did a "save as" and created my baseline model, and changed all of the HVAC systems etc. to the required 90.1 standards. I ran the simulations and exported the LEED  report and noticed my receptacle loads aren't the same-the baseline is 12% higher than the proposed. I've compared schedules, equipment loads, and square footages, and they are identical in both the proposed and baseline models. Is there something else I should be looking at?

Thanks for your help!

Stephanie Andersen
Mechanical Designer

[DBR-for Email Signature]

v. 210.546.0200 | www.dbrinc.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130516/b2436d8e/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 3660 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130516/b2436d8e/attachment.jpg>