[Equest-users] .How to delete a floor in eQuest model in detail design mode.

[John Aulbach]

I interpret Ankits question to be in the DD Wizard mode (DD being Design Development).
 
If he IS in the DETAIL EDIT mode, then he will need to deal with the .INP file for the most part to remove his floor.
 
John Aulbach, PE


________________________________
From: Mayank Bhatnagar <mayank.23aug at gmail.com>
To: Ankit.Anil.Gupta at jci.com 
Cc: equest-users at lists.onebuilding.org 
Sent: Monday, May 20, 2013 9:30 PM
Subject: Re: [Equest-users] How to delete a floor in eQuest model in detail design mode.



Hello Ankit,

I am little bit confuse of your question; Either it will be in detail data mode or wizard data mode (you write "detail design wizard mode"). 
As my knowledge, If you are in wizard mode you can easily change the multiplier numberin the screen 1 of DD wizard: Shell component.


If you are in detailed mode, when you go at spreadsheet tab of Building shell, internal load, and air-side tab, you will get columns for space multiplier and floor multiplier. By changing these number you can get desire floors.  

If someone has other way to do it, please share with us.



Regards,


Mayank Bhatnagar

Energy Analyst



On Mon, May 20, 2013 at 7:06 PM, <Ankit.Anil.Gupta at jci.com> wrote:

Hi, 
>
>I have build a model for LEED compliance using a multiplier option in eQuest, now by mistake my multiplier went wrong resulting in one excess floor in each wing of building. 
>
>So can anyone guide me to delete a floor eQuest model in detail design wizard mode. 
>
>
>Thanks 
>Ankit 
>
> 
>_______________________________________________
>Equest-users mailing list
>http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130520/ec055739/attachment-0002.htm>