[Equest-users] Exterior Windows misplaced

[Ryan Black]

I am very new to eQuest and am working on completing my very first model. I
imported a .dwg file to set up the building footprint and zones and have
begun on exterior elevations. I have been inputting my exterior glazing
using the "Custom Window/Door Placement..." option in the DD Wizard. I have
all the windows input correctly, but when I back out and go to the 3-D view
of the building, some of the windows are on the wrong walls, and some I am
not seeing at all (unless they are 'doubling up' on one of the other
walls). I am not sure if I have made an error in the earlier stages of
constructing the model thus far, or if this is some type of glitch. Does
this sound familiar to anyone? Any advice?

I have seen that I can go in and change the parent wall for the misplaced
windows in the detailed edit mode, but would just like to figure this out
for future models going forward.

Thanks!

Ryan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20130910/40e22e7e/attachment.htm>