[Equest-users] Zone thermostat setpoint

[Keith Swartz]

Behnam,

Sorry, I was thinking about the -999 option in the fan schedule. Can you send your .pd2 and .inp files to the group?

Keith Swartz, PE, BEMP, LEED AP
Senior Energy Engineer | Energy Center of Wisconsin | Madison.Chicago.Minneapolis
608.210.7123 | www.ecw.org<http://www.ecw.org/>

From: Keith Swartz
Sent: Wednesday, December 03, 2014 4:48 PM
To: 'behnam jowkar'; equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] Zone thermostat setpoint

Behnam,

“-999” is a secret code for optimal start. See the help screen. The summertime heat might be from some cool mornings.

Keith Swartz, PE, BEMP, LEED AP
Senior Energy Engineer | Energy Center of Wisconsin | Madison.Chicago.Minneapolis
608.210.7123 | www.ecw.org<http://www.ecw.org/>

From: behnam jowkar [mailto:behnamjowkar at gmail.com]
Sent: Tuesday, December 02, 2014 8:33 AM
To: equest-users at lists.onebuilding.org<mailto:equest-users at lists.onebuilding.org>
Subject: [Equest-users] Zone thermostat setpoint

Hi Guys,

When I look at the hourly report for my proposed model zones, it shows the thermostat setpoint as -999 for some hours and for some reason, it thinks that it is in the heating mode (only shows the thermostat setpoint for heating) even in summer time. I have the same system type (VAV), temperature and fan schedule for both the proposed and reference model, but I don's see the same problem in my reference model. Has anyone seen this before? any help is greatly appreciated.

Regards,

Behnam

--
Behnam Jowkar, MASc, BEng, LEED AP BD+C
Mechanical Engineer In Training
p: 416-716-5758
e: behnamjowkar at gmail.com<mailto:behnamjowkar at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20141204/4e592808/attachment.htm>