[Equest-users] Anyone have this happen in eQuest 3.64 ??

John Aulbach jra_sac at yahoo.com
Tue Feb 11 12:44:40 PST 2014


Hi gang:

I didn't attach a file as you can make a simple one on your own. Here goes:

I created a 6 story multi family basic run in the SD Wizard. I created a wood frame wall with R-19 batt insulation. Runs fine. I then created a wood framed roof with insulation above deck and none below. Runs fine. I then switched, putting the insulation below deck and removing that above.  Runs fine.

THEN, I placed both an R-8 above deck and an R-30 below.

BDL FREEZES. !!!!

I checked the raw .BDL file and no errors shown.

I combined the insulations below deck and again, no problem.

I even reinstalled the program, with the same result.

Anyone ever experience this before?

I swear I have had only coffee to drink !!

John R. Aulbach, PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140211/35133065/attachment.htm>


More information about the Equest-users mailing list