[Equest-users] adiabatic condenser - Heat rejection
Charline Seytier
charline.seytier at themaverde.fr
Fri Feb 28 04:49:25 PST 2014
Dear all,
We're currently modeling a building using adiabatic condenser (see attached
picture) as heat rejection device.
Since adiabatic condensers/coolers are not an available option in eQuest,
what would be the best system to accurately model this system?
As of right now, we have been modeling it using a combination of dry and wet
coolers with a detailed sequence of operation based on Outside Air
temperature.
This option does not seem to provide the correct energy consumption for the
adiabatic condensers.
Thanks in advance,
Charline Seytier, LEED AP BD+C
Co-Owner, CEO
ThemaVerde
155 rue de Belleville
75019 Paris, France
<mailto:charline.seytier at themaverde.fr> charline.seytier at themaverde.fr
<http://www.themaverde.fr/> www.themaverde.fr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140228/9cb18863/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Adaibatic condenser.png
Type: image/png
Size: 238213 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140228/9cb18863/attachment.png>
More information about the Equest-users
mailing list