[Equest-users] Variable Volume Help Needed!
Byron Burns
B.Burns at ha-inc.com
Tue Feb 18 14:30:29 PST 2014
Hello Matt,
It sounds like you are converting it to a PVVT system, have you looked into the eQUEST definitions for that unit type?
Byron D. Burns, EIT, BEMP
Energy Analyst/ Modeler
H&A Architects & Engineers | www.ha-inc.com<http://www.ha-inc.com>
d: (804) 420-1622 p: (804) 285-4171 f: (804) 217-8520
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Matt Larson
Sent: Tuesday, February 18, 2014 5:24 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Variable Volume Help Needed!
I am modeling a building with an existing single zone 4-pipe chilled and hot water air handler unit that is currently constant volume but being converted to constant volume. The unit feeds many spaces through a single duct. I modeled the system as a single zone with heat (SZRH) system and tried to add in a variable speed drive and lower the minimum flow ratio, but can't get the fan speed to reduce when not needing 100% flow. I also tried modeling the system as a variable volume system (VAVS) and the airflow ramps down but then the program adds a VAV box for each zone, which isn't what is occurring. I am trying to control only to the worst case zone, as will be the installed case.
Which system type should I be using for modeling this system, and how do I get it to model as noted above?
I appreciate any help! Thanks,
Matt Larson, P.E., QCxP, LEED AP
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140218/15bbbf0d/attachment-0002.htm>
More information about the Equest-users
mailing list