[Equest-users] Equest-users Digest, Vol 76, Issue 3

wafik adbelkarim abdelkarim.wafik at gmail.com
Fri Jul 4 18:47:52 PDT 2014


hi eQuest users,
 i am a new member of eQuest -users and a fan of the energy modelling
business.
 i am facing a problem in understanding how to finalize the proposed
building and the baseline on eQuest.
could you please guide me to videos or anything which may help me
understanding eQuest more and more.
thanking you


wafik


On 4 July 2014 00:02, <equest-users-request at lists.onebuilding.org> wrote:

> Send Equest-users mailing list submissions to
>         equest-users at lists.onebuilding.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
> or, via email, send a message with subject or body 'help' to
>         equest-users-request at lists.onebuilding.org
>
> You can reach the person managing the list at
>         equest-users-owner at lists.onebuilding.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Equest-users digest..."
>
> Today's Topics:
>
>    1. Re: Error in simulation (sravya lakshmi)
>
>
> ---------- Forwarded message ----------
> From: sravya lakshmi <sravyalakshmi3 at gmail.com>
> To: John Aulbach <jra_sac at yahoo.com>
> Cc: "equest-users at lists.onebuilding.org" <
> equest-users at lists.onebuilding.org>
> Date: Thu, 3 Jul 2014 11:15:13 +0530
> Subject: Re: [Equest-users] Error in simulation
> We have uninstalled 3.65 and installed 3.64 and it is working fine.Thanks
> for Your advice
>
> sravya
>
>
>
>>
>
> On Wed, Jul 2, 2014 at 9:27 PM, John Aulbach <jra_sac at yahoo.com> wrote:
>
>> Sravya:
>>
>> Make sure that they are using the same Version you are using. eQuest 3.65
>> will not run under 3.64, 3.64 will not run under 3.63, etc.
>>
>> John R. Aulbach, PE
>>
>>
>>    On Wednesday, July 2, 2014 3:24 AM, sravya lakshmi <
>> sravyalakshmi3 at gmail.com> wrote:
>>
>>
>> Hi everyone
>>
>> I m currently working on equest for my one of my projects.After i have finished making shells and zones , I have mailed it to others to continue with the simulation .But when they are trying  to do simulation the following error is shown.can someone please help me with this
>>
>> Error: “Forrtl: info (58): format syntax error at or near (Note: u-values include outside air film)'//73X, "LOCATION OF ORIGIN'/51Xm 'GL”
>>
>> Thank you
>>
>> sravya
>>
>>
>> _______________________________________________
>> Equest-users mailing list
>> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>> To unsubscribe from this mailing list send  a blank message to
>> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>>
>>
>>
>
> _______________________________________________
> Equest-users mailing list
> Equest-users at lists.onebuilding.org
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140705/265f8901/attachment.htm>


More information about the Equest-users mailing list