[Equest-users] Natatorium/Pool

[Jeff Haberl]

Hello John,



We modeled the pools at the Rec Center at the University of Colorado in 1985 using DOE-2 using information from a booklet that Frances DeWinter developed at Atlas Corporation. In it was an equation for calculating the evaporation off the surface of the pool, and thus the latent load. I could scan the report and send it to you if you're interested. Also, the old version of the FCHART manual used to have equations for calculating the loses from exposed pools, which was also helpful.



Jeff



8=!  8=)  :=)  8=)  ;=)  8=)  8=(  8=)  8=()  8=)  8=|  8=)  :=')  8=)8=?
Jeff S. Haberl, Ph.D.,P.E.,FASHRAE,FIBPSA,........jhaberl at tamu.edu<mailto:........jhaberl at tamu.edu>
Professor............................................................Office Ph: 979-845-6507
Department of Architecture.............................Lab Ph:979-845-6065
Energy Systems Laboratory.............................FAX: 979-862-2457
Texas A&M University.....................................77843-3581
College Station, Texas, USA, 77843..................URL:www.esl.tamu.edu
8=/  8=)  :=)  8=)  ;=)  8=)  8=()  8=)  :=)  8=)  8=!  8=)  8=? 8=)8=0
________________________________
From: equest-users-bounces at lists.onebuilding.org [equest-users-bounces at lists.onebuilding.org] on behalf of John Aulbach [jra_sac at yahoo.com]
Sent: Saturday, March 29, 2014 1:36 PM
To: RobertWichert; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Natatorium/Pool

And once you have monthly numbers, yoiu can force feed it into eQuest as a gas Load.

From: RobertWichert <robert at wichert.org>
To: equest-users at lists.onebuilding.org
Sent: Saturday, March 29, 2014 8:44 AM
Subject: Re: [Equest-users] Natatorium/Pool

Well, it's not EQuest, but it's on topic:

http://energyexperts.org/CalculatorsTools/PoolEnergyUseCalculator.aspx



Robert Wichert P.Eng. LEED AP BD&C
+1 916 966 9060
FAX +1 916 966 9068







===============================================


On 3/28/2014 11:49 AM, Tom Mickley wrote:
Does anyone have a simple, easy way to model an in ground pool and spa for a natatorium?



Thanks,

Tom Mickley
Mechanical Engineer CEM
The K Company
Cell 330-760-3994
Office 330-773-5125




_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>



_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG<mailto:EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140330/89e4b3bd/attachment-0002.htm>