[Equest-users] 转发：The results of your email commands

[冷面寒枪]

Can someone explain why a PVVT is usually chosen to model VRV/VRF?
As we all know, Packaged Variable-volume Variable-Temperature (PVVT) systems can be used to model VRV/VRF system in eQUEST software, but what I am confused is why a PVVT system can be used.
Load adjustment in pvvt system is implemented by varying supply air flow and supply temperature. But in VRv system，load adjustment is implemented by varying refrigerant flow in each coil. There is a significant difference between the vrv and pvvt system. And l always can not get reasonable result using this way, the heating energy consumption is always too small.
Can someone explain why a PVVT is usually chosen to model VRV/VRF?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140928/22efd94f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: tcmime.2613.2664.10061.eml
Type: application/octet-stream
Size: 7397 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20140928/22efd94f/attachment.obj>