[Equest-users] 回复： Hot water loop OA temperature reset controll9

[冷面寒枪]

The simply answer is YE,
you can define primary reset schedule and alternate reset schedule i.n reset schedule.For example,set your occupied time is from 7:00 to 19:00,then you can set start hour and end hour are 7 and 19 respectively.
---原始邮件---
发件人: "Jones, Christopher"<cjones at halsall.com>
发送时间: 2015年01月23日 21:38:20
收件人: "equest-users at lists.onebuilding.org"<equest-users at lists.onebuilding.org>;
主题: [Equest-users] Hot water loop OA temperature reset control


  
I am working on a project that has two OA temperature reset control strategies – one for occupied mode and one for unoccupied mode.  My question:  is it possible to have two distinct OA temperature reset control strategies on a hot water loop based on time of day?
 
 
  
Christopher Jones, P.Eng. 
 Tel: 416.644.4226 • Toll Free: 1.888.425.7255 x 527
 
 
 
 
 
 ______________________________________________________________________
 NOTICE: This communication and any attachments ("this message") may contain confidential information for the sole use of the intended recipient(s). Any unauthorized use, disclosure, viewing, copying, alteration, dissemination or distribution of, or reliance on this message is strictly prohibited. If you have received this message in error, or you are not an authorized recipient, please notify the sender immediately by replying to this message, delete this message and all copies from your e-mail system and destroy any printed copies.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150123/f5134e58/attachment.htm>