[Equest-users] SD Bldg Shell -Change in bldg shell order

[Pranita Kothuru Komirishetty]

Hello All -

I am working on a multistory building with 15 floor types (E1 to E15).
After doing all the 15 shell types we have decided to split the E1 into 5
different shells (E1, E1a, E1b, E1c, E1d) since the zoning is very
different on each of these floors.

I was able to create new shells( by copying data from E1) and place them
above the corresponding floor. I am having issues when it comes to placing
my E2 above E1d.

In the schematic design wizard screen 1, in Posiiton this shell immediately
above............... (where we have to pick the shell from the drop down
list), here I do not see the E1d shell (which I created after all the above
above shells were created.

I changed the prefix names to E1a  to E1d instead of using the default
eQuest names.

Currently E2 says its above E1, instead it has to be above E1d. The drop
down list does not show E1d. I saved and simulated the model assuming it
might then populate the new shells in the drop down list. This did not work.

Any thoughts on how to fix this.


-- 

*- Pranita *
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150623/4a220f7a/attachment.htm>