[Equest-users] Sim file questions

[Jeff Haberl]

FYI:



The " - - - "s in DOE-2 files were put there so one  could count the space numbers on a 132 character line printer. These are less than useful when looking at the file electronically.



Jeff


8=!  8=)  :=)  8=)  ;=)  8=)  8=(  8=)  8=()  8=)  8=|  8=)  :=')  8=) 8=?
Jeff S. Haberl, Ph.D.,P.E.inactive,FASHRAE,FIBPSA,......jhaberl at tamu.edu<mailto:........jhaberl at tamu.edu>
Professor........................................................................Office Ph: 979-845-6507
Department of Architecture............................................Lab Ph:979-845-6065
Energy Systems Laboratory...........................................FAX: 979-862-2457
Texas A&M University...................................................77843-3581
College Station, Texas, USA, 77843.............................http://esl.tamu.edu
8=/  8=)  :=)  8=)  ;=)  8=)  8=()  8=)  :=)  8=)  8=!  8=)  8=? 8=) 8=0
________________________________
From: Equest-users [equest-users-bounces at lists.onebuilding.org] on behalf of bfountain at greensim.com [bfountain at greensim.com]
Sent: Monday, May 11, 2015 1:20 PM
To: 'Sami, Vikram'
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Sim file questions

I can answer the 2nd question:

Select the parametric component “Titles”, select the keyword e.g. LINE-3 and enter the value *ASHRAE 90.1 Ref Run*

It is important to put the title between asterisks.

As to the 1st question, I have not noticed that before.

From: Equest-users [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Sami, Vikram
Sent: May-11-15 2:03 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Sim file questions

So I have a couple of questions regarding the images here:
SIM File
[cid:image001.png at 01D08BF4.596385C0]
INP File
[cid:image002.png at 01D08BF4.596385C0]


1.       I notice that sometimes in my SIM file (version 3.65) I am missing the titles in the BEPS, BEPU and some other reports for end use breakdowns (area highlighted in yellow)

2.       Also – Area highlighted in cyan – I want to know how I can change the title of the sim file PARAMETRICALLY. I am aware of how to do it in the inp file (highlighted above), but I am running a bunch of parametric simulations and would love to know how to do this as a parametric command. I’m hoping this is possible.

Thanks in advance!

-Vikram

Vikram Sami
AIA, BEMP, LEED BD+C
Associate Partner



ZGF ARCHITECTS LLP
T 206.521.3509 E vikram.sami at zgf.com<mailto:vikram.sami at zgf.com>
925 Fourth Avenue, Suite 2400
Seattle, WA 98104


ZGF Email Disclaimer<https://www.zgf.com/ZGF_Email_Disclaimer.html>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150511/6454721f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 22044 bytes
Desc: image001.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150511/6454721f/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 12282 bytes
Desc: image002.png
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20150511/6454721f/attachment-0001.png>