[Trace-users] SCR Electric Heat

Bob Vogt BVogt at luckett-farley.com
Thu Mar 19 12:29:58 PDT 2009


I would think this should be easy with Trace. I am not familiar with the
"unloading curve" of and scr heater but, using the Trace library editor
a curve could be found or created with many steps of control. This
should mimic an scr. My library has a some curves with many steps or a
curve function could be used.

Hope this helps

Robert Vogt
Mechanical Group, LEED Accredited Professional
Luckett & Farley
      [smart design]
737 South Third Street
Louisville, Kentucky 40202
502-585-4181 x105
502-587-0488 Fax
Bvogt at luckett-farley.com
Founded 1853
P Please consider the environment before printing this e-mail. 
This electronic message is intended for transmission to authorized
persons only. It may contain information that is confidential,
privileged, proprietary or subject to other confidentiality protections.
It is not intended for transmission to, or receipt by, any unauthorized
persons. If you are not authorized to receive this message, you may not
review, copy, forward or otherwise distribute this message. If you have
received this message in error, please notify the sender by reply e-mail
and delete it from your system. Thank you.

-----Original Message-----
From: trace-users-bounces at lists.onebuilding.org
[mailto:trace-users-bounces at lists.onebuilding.org] On Behalf Of
trace-users-request at lists.onebuilding.org
Sent: Thursday, March 19, 2009 3:08 PM
To: trace-users at lists.onebuilding.org
Subject: Trace-users Digest, Vol 11, Issue 1

Send Trace-users mailing list submissions to
	trace-users at lists.onebuilding.org

To subscribe or unsubscribe via the World Wide Web, visit
or, via email, send a message with subject or body 'help' to
	trace-users-request at lists.onebuilding.org

You can reach the person managing the list at
	trace-users-owner at lists.onebuilding.org

When replying, please edit your Subject line so it is more specific than
"Re: Contents of Trace-users digest..."

Today's Topics:

   1. modeling SCR electric heat controllers? (Julia Beabout)


Message: 1
Date: Thu, 19 Mar 2009 08:48:40 -0700 (PDT)
From: Julia Beabout <juliabeabout at yahoo.com>
Subject: [Trace-users] modeling SCR electric heat controllers?
To: trace-users at lists.onebuilding.org
Message-ID: <685068.60440.qm at web111414.mail.gq1.yahoo.com>
Content-Type: text/plain; charset="us-ascii"

Does anyone have experience modeling SCR controllers for electric reheat
in Trace?
I've tried a couple things but have not been able to accomplish it
successfully yet.
If anyone has done this successfully or have suggestions on how to do it
well, please let me know.

Thanks in advance for your feedback.

-------------- next part --------------
An HTML attachment was scrubbed...


Trace-users mailing list
Trace-users at lists.onebuilding.org

End of Trace-users Digest, Vol 11, Issue 1

More information about the Trace-users mailing list